Architectural metal work types in Utah

Six kinds of work cover almost everything that leaves our shop. Each one has its own page with details, what to send and common questions.

Finished decorative metal panels with different perforation patterns leaning against a pale shop wall

Six kinds of work make up almost everything that leaves our shop. Some jobs use one of them, such as a batch of laser cut plates. Most combine two or three: a panel is cut, its edges are folded, and its face is brushed to match a sample. Each work type below has its own page with what we make, what to send and answers to the questions we hear most.

If you are not sure which one your project needs, that is normal. Send the drawing or a photo and tell us what the piece has to do. We will tell you how we would make it and which steps it goes through.

Three metals

Every work type can use any of the three. The choice usually comes down to weight, touch and the finish you want.

  • Steel

    Economical, stiff and easy to paint. Used for frames, plates, panels that will be coated and the darker interior looks.

  • Stainless steel

    For surfaces that are touched and cleaned every day: counters, kick panels, trims and fixture parts.

  • Aluminum

    Light and rust free. Used for large screens, long trims, covers and pieces that are moved often.

How the work types fit together

Laser cutting is usually the first step: it gives every part an accurate outline and puts the holes and patterns where they belong. Bending comes next for anything with a return, a channel or a cap. Finishing follows, from simple deburring of edges to a brushed or polished face. Architectural pieces and panels are what most of these steps add up to, and stainless and aluminum work follow the same path with handling suited to each metal.

Because all of it happens under one roof, a part does not travel between shops between steps. That keeps the grain direction, the finish and the labeling consistent from the first cut to the crate.

Not sure which work type you need?

Send the drawing or a photo and tell us what the piece has to do. We will tell you how we would make it.