Aluminum fabrication in Utah

Lightweight screens, panels, trims, covers and small enclosures cut, folded and finished in aluminum, easy to move around a busy job.

Request a quote(719) 237-5148

Stack of raw aluminum screen panels with slotted openings and one panel on sawhorses catching daylight

Aluminum is the friendly metal of interior work. It weighs about a third of steel, so a large screen panel can be carried by two people and held by lighter fixings. It does not rust, it cuts and folds cleanly and it takes a brushed finish or a coat of paint well. For many feature walls, displays and ceiling-height screens it is the sensible choice.

We fabricate aluminum parts for designers, retail and display makers, furniture and fixture shops and equipment assemblers. Typical jobs are perforated screens, folded trims, display backs, covers and light enclosures, made as single pieces or small sets.

What we make

  • Screens and panels

    Perforated or solid panels for dividers, wall features and display backs.

  • Folded trims

    Edge, corner and reveal trims that are light and easy to handle on long runs.

  • Covers and fascias

    Folded covers for lighting channels, cable runs and equipment inside furniture and fixtures.

  • Small enclosures

    Light folded boxes and housings for displays, controls and fixtures.

Why choose aluminum over steel

Choose aluminum when weight matters: big screens, pieces that are lifted high, parts that will be moved or swapped often. Choose it when the piece lives near moisture, such as an entry area or a pool hall, because it will not rust. Steel is stiffer for the same thickness and costs less, so for small, heavily loaded parts it can be the better pick. We are happy to talk through both before you decide.

Finishing aluminum

Raw aluminum has a soft silver look that dulls gently over time. Brushed aluminum hides fingerprints and small marks well. For color, we prepare the surface so paint or powder coat holds, and you send the parts to your preferred coating shop. Because aluminum scratches more easily than steel, we keep film on visible faces and pack each piece with separators.

Aluminum also moves more with temperature than steel. On long trims and big panels we leave room for that in the detail, and we flag it if your drawing has tight joints.

Aluminum fabrication: common questions

Is aluminum strong enough for a screen?

For interior screens and panels, yes, when the thickness, pattern and edges are chosen well. Folded returns add a lot of stiffness. We suggest a thickness in the quote.

Can aluminum be painted?

Yes. We prepare the surface so paint holds. The coating itself is done by your chosen coating shop.

Will raw aluminum change color?

It dulls slightly over time to a soft grey. Brushed or painted finishes keep a more even look.

Can you mix aluminum and steel in one piece?

We can make parts in both, but the two should be separated where they touch to avoid corrosion. We discuss the detail before quoting.

Do you make small enclosures?

Yes, light folded enclosures and covers for displays, controls and fixtures, made to your drawing.

Need aluminum fabrication?

Send the drawing, the material and the quantity. We come back with questions and a written quote.